Easy Fixes for a Leaking Bathroom Tap.

Quickfix
Aug 16, 2024

A leaking bathroom tap can be a nuisance and a waste of water. The good news is that you can often fix it yourself with just a few tools and a little time. Here’s a simple guide to help you understand why your tap might be leaking and how you can repair it at home.

Why Is My Tap Leaking?

There are a few common reasons why your tap might be leaking:

Worn-out Washer: The rubber washer inside the tap can wear out over time, causing leaks.
Damaged O-ring: This small rubber ring helps keep the tap handle in place. If it's damaged, it can cause leaks at the base.
Corroded Valve Seat: The valve seat connects the tap to the spout. If it gets corroded, you might see leaks around the spout.
Loose Parts: Parts of the tap can become loose with regular use, leading to leaks.
Worn-out Cartridge: Modern taps use a cartridge system to control water flow. If the cartridge is worn, it can cause leaks.

How to Fix Your Leaking Tap

Here’s a step-by-step guide to fixing your tap. You’ll need:

An adjustable wrench
A screwdriver
Replacement parts (like a washer, O-ring, or cartridge)
Plumber's tape
A cloth or towel

Steps to Repair Your Tap

1. Turn Off the Water Supply:
Before you start, make sure the water supply is off. You can usually find a valve under the sink or shut off the main water supply.

2. Remove the Tap Handle:
Use a screwdriver to remove the cap on top of the tap handle. Then unscrew the handle screw and take off the handle to see the inside parts.

3. Check the Washer and O-ring:
If you have a compression faucet, look at the washer at the base of the valve stem. If it’s worn out, replace it. Check the O-ring for damage and replace it if needed.

4. Inspect the Valve Seat:
Look for corrosion or buildup on the valve seat. Clean it with a cloth or brush. If it's too corroded, you may need a new one.

5. Replace the Cartridge:
If your tap uses a cartridge, take it out and check for damage. Replace it if necessary.

6. Put the Tap Back Together:
Reassemble the tap by reversing the steps you took to take it apart.

7. Turn the Water Back On:
Turn the water supply back on and check for leaks.

8. Test the Tap:
Turn the tap on and off to make sure it works and there are no leaks.

Tips for Success

Use Plumber's Tape: When putting the tap back together, wrap plumber's tape around the threads for a tight seal.
Regular Maintenance: Check your taps regularly to prevent future leaks. Get annual maintenance contract (AMC) service from Quick Fix.
Call a Professional: If you’re not comfortable doing the repairs, or if the problem persists, call a plumber from QUICK FIX.

Fixing a leaking tap is a simple DIY project that can save you money on water bills and give you the satisfaction of fixing something yourself. Give it a try!